Larah Fog Roman Blind100% Recycled Velvet Fabric

With a classic matt appearance, and produced entirely from recycled plastic bottles, this short pile roman blind fabric is equally soft and versatile. Shown here in a stormy grey shade, this multi-purpose plain is available in 17 usable colourways.
Recycled

Recycled

39 plastic bottles are recycled to create every meter of this fabric

39 plastic bottles are recycled to create every meter of this fabric

British Made

British Made

How to measure for roman blinds

How to Measure Blinds

Measuring Inside a Recess

Width

Measure the width of the window recess in three places: the top, middle and bottom. Use the smallest measurement.

Height

Measure the height of the window recess in three places: at both sides and in the middle. Use the smallest measurement.


Measuring Outside a Recess

Width

Measure the width of your recess and add to it the measurement of how far you’d like the blind to finish either side of the recess. This would usually be approximately 10cm either side of the recess.

Height

Measure from where you want the top of the blind to sit to where you would like the blind to finish. This would usually be approximately 10cm above and below the recess. Be sure to consider any protrusions or obstructions too. 


Fixing Height

Inside Recess

Outside Recess

Measure, to the nearest centimetre, from the where the top of the blind will be positioned to the floor. This measurement is used to adhere to child safety regulations.


Measuring Inside A Recess

Width

Measure the width of the window recess at the top, centre and bottom. Use the smallest measurement.

Height

Measure the height of the window recess at both sides and in the middle. Use the smallest measurement.

Measuring Outside A Recess

Width

Measure the width of the window recess and add this to how far you would like the blind to finish at each side of the recess. Ideally with a clearance of 10cm each side.

Height

Measure from where you would like to position the top of the blind to where you would like it to finish. Ideally with around 10cm at the top and bottom. Make sure you consider potential obstructions.

Fixing Height

Inside Recess

Outside Recess

This is the measurement, to the nearest centimetre, from where the top of the blind will be positioned to the floor. We use this measurement to understand the approximate chain length required.

Select Position:

Inside Recess
Outside Recess

Fixing position content edited in 'Fixing Position Block' block

Select Chain Position:

Chain position content edited in 'Chain Position' Block

Chain Position Block

Select Chain Colour:

Chain colour content edited in 'Chain Colour' Block

Chain Color Content

Select Lining:

Standard
Blackout

Blind Lining

We offer the choice of two lining qulalities, both in a soft ivory colour.

Standard: Standard lining gently filters the light, giving your home a soft glow. Made from a premium quality mix of BCI cotton and polyester produced from recycled plastic bottles.

Blackout: Blackout lining eliminates light while also further improving insulation, and is therefore ideal for bedrooms to create a warm and cosy space.

Interlining Required?

Interlining provides warmth, weight and luxury.

Yes
No

Blind Interlining

Our Blind Interlining is an additional layer that is bonded to the blind lining. Bonded Interlining is used to prevent sagging and add body and weight to the fabric, giving the blind a luxurious feel, while also helping with insulation.

Total: £0.00